How to Maintain Solid Wood Windows and Doors

To maintain solid wood windows and doors, wipe the frames and panels with a soft cotton or microfibre cloth, clear dust and grit from sliding tracks, and check the seals and timber finish periodically. The Artius user manual recommends a light clean daily or every other day and a more thorough clean every three to four weeks. For exterior openings, check the sills, seals and finish before the monsoon and after periods of heavy rain.

How do you clean solid wood frames, panels and glass?
Wipe the timber frames, window sashes and door panels with a soft cotton or microfibre cloth. If the finish specified for your installation allows damp cleaning, use a lightly damp cloth and wipe the surface dry afterwards. Pay particular attention to exterior sills and the bottom edges of doors, where dust and moisture tend to collect.
Use a mild glass cleaner on the glazing. For dust in corners, use a soft brush or a vacuum with a soft brush attachment. Wipe handles and accessible hardware with a soft, dry cloth, and avoid abrasive pads, stiff nylon brushes and corrosive cleaners.
How do you care for different Artius window and door systems?
Lift & Slide windows and doors. Clear loose grit from the bottom rail and vacuum corners that are hard to reach. Turn the handle to the operating position before sliding the panel.
Slide & Fold doors. Keep the track and corners clear. Release the fitted bolts before folding the panels, and guide the panels gently as they move.
Casement and Tilt & Turn windows. Keep accessible hinges and locking points free of dust and moisture. On a Tilt & Turn window, close the sash fully before switching between tilt and turn. Where a restrictor is fitted, open the sash only as far as it allows.
Casement doors, solid wood doors and main doors. Wipe the frame, panel and handle. Check the seals and pay attention to any change in how the door closes or locks.
Louvred windows and fixed windows with ventilators. Wipe the frame and keep dust from building up around the moving parts of the louvres or ventilator.
Operate windows, doors and retractable insect mesh gently and regularly, especially in rooms that are seldom used. Follow the operating instructions supplied for the system fitted in your home. Explore Artius solid wood windows and doors.
What should you check before the monsoon?
Start with exterior openings that receive direct rain, such as terrace doors and windows without a verandah or overhang.
Sills and drainage. Clear dirt from exterior sills and keep drainage openings clear where fitted.
Weather seals. Check for loose sections, gaps or seals that have pulled away from the frame.
Timber finish. Look for peeling or persistent water marks, especially along the lower edges of frames and panels.
Operation. Open, close and lock each system gently. Note any new rubbing, stiffness or resistance at the handle.
Check exposed openings again after heavy rain. If water repeatedly collects around the same opening or you notice fresh staining, photograph the affected area and share it with Artius so the team can review the finish, seals and drainage.
How often do solid wood windows and doors need refinishing?
The timing depends on the finish specified for your project and how much direct sun and rain the opening receives. A terrace door exposed to the weather may need attention sooner than a door sheltered by a verandah. If the finish starts to peel or water marks persist, ask Artius to review the condition and recommend the appropriate treatment.
What should you do if a wooden window or door becomes hard to open or lock?
Clear any visible grit from the track or sill and check that the handle is in the correct operating position. If the panel still rubs, the handle feels unusually stiff or the lock needs extra force, contact Artius for a review before adjusting the hardware. Share the system type, its location, a photo of the full opening and a close-up or short video showing where it catches. Contact the Artius team.



Comments